APC Back-UPS Pro uninterruptible power supply (UPS) 1500 VA 10 AC outlet(s) Line-Interactive

APC BR1500GI

BACK-UPS PRO 1500 230V

Power Saving Back-UPS Pro 1500, 230V

APC Back-UPS Pro, 1500 VA, 865 W, 156 V, 300 V, 50/60 Hz, 441 J

APC Back-UPS Pro. Output power capacity: 1500 VA, Output power: 865 W, Input operation voltage (min): 156 V. AC outlet types: C13 coupler, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 8 h, Typical backup time at half load: 12.4 min. Product colour: Black, Display: LCD. UPS topology: Line-Interactive, Hold time (min): 10 ms, Hold time (max): 12 ms

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
ThumbFile information
Product Environmental Profile.pdf 379.63KB 0
mmo_5879186_1474375640_2137_17967.pdf 92.96KB 0
mmo_5879186_1474375633_3752_16782.pdf 249.85KB 0
Dimensions
Width39
Height24
Length49
Depth (mm)382.0
Height (mm)302.0
Width (mm)112.0
Weight (Kg)12.70
General
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Basic Specification
Marketing TextAPC Power-Saving Back-UPS Pro 1500 Gives higher application availability by correcting low and high voltage conditions without using the battery.
PI DATE
PI DateFeb 2011
PRODUCT
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com
Product TypeUninterruptible Power Supply
Product LineBack-UPS Pro
OTHER FEATURES
Cord Length1.83
Operating Temperature0 - 40
Other Features* Battery-protected and surge-only outlets
* Hot-swappable batteries
* Adjustable voltage-transfer points
* Transformer-block spaced outlets
* Boost and Trim Automatic Voltage Regulation (AVR)
ColourBlack
Control Panel* Multi-function LCD status and control console
Audible Alarm* Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Environmental ComplianceRoHS
Nominal output voltage230 V
Nominal input voltage230 V
BATTERY
TypeSealed Lead Acid
Typical backup time at half load12.4 min
Typical backup time at full load3.7 min
Hot-swap batteryY
Automatic battery testY
Cold startY
Battery technologySealed Lead Acid (VRLA)
Battery capacity187 VAh
Battery recharge time8 h
Replacement battery cartridgeAPCRBC124
Battery life (max)5 year(s)
POWER
Input Voltage230
Output Power865 W
Output Voltage230
Surge Energy Rating441 J
Input Frequency50 - 60
Output Frequency50 - 60
WaveformSinewave
Output power capacity1500 VA
Input operation voltage (min)156 V
Input operation voltage (max)300 V
Power supply input frequency50/60 Hz
Efficiency98.9%
Crest factor3:1
Output frequency regulation50/60 Hz
CONNECTION
Input Connection1 x IEC-320 C14
Output Connection2 x IEC Jumpers
Interface1 x USB
Weight & dimensions
Weight12.7 kg
Width112 mm
Depth380 mm
Height301 mm
Package weight14.3 kg
Package width238 mm
Package depth488 mm
Package height387 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 40 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 9000 m
Non-operating altitude0 - 15000 m
Design
DisplayLCD
Product colourBlack
Ports & interfaces
AC outlets quantity10 AC outlet(s)
AC outlet typesC13 coupler
USB portY
Number of output IEC jumpers2
Certificates
RoHS complianceY
CertificationA-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS
Energy Star certifiedY
Performance
Audible alarm modesLow battery alarm,Overload alarm
UPS topologyLine-Interactive
Noise level45 dB
Surge protection featuresDigital Subscriber Line (DSL),Fax,Modem,Network,Telephone
Surge protectionY
WaveformSine
Audible alarm(s)Y
Hold time (min)10 ms
Hold time (max)12 ms
Automatic Voltage Regulation (AVR)Y
Technical details
Input connectionsIEC-320 C14
Packaging content
Warranty cardY
Bundled softwarePowerChute Personal Edition
ManualY
Cables includedPhone (RJ-11),USB cable
Software CDY
Logistics data
Quantity per master carton1 pc(s)
Quantity per pallet20 pc(s)

Write a review

Please login or register to review

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: BR1500GI
  • Availability: In Stock
  • $585.72
  • Ex Tax: $532.48

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check