APC Smart-UPS VT 40kVA 400V uninterruptible power supply (UPS) 40000 VA

APC SUVTP40KHS

APC Smart-UPS VT 40kVA 400V w/Internal Maintenance Bypass & Parallel Capability

Smart-UPS VT 40kVA 400V, w/Start-Up 5X8, Internal Maintenance Bypass, & Parallel Capability

APC Smart-UPS VT 40kVA 400V, 40000 VA, 32000 W, 55 A, 5 h, Black, 55 dB

APC Smart-UPS VT 40kVA 400V. Output power capacity: 40000 VA, Output power: 32000 W, Maximum current: 55 A. Battery recharge time: 5 h. Product colour: Black. Noise level: 55 dB. Certification: C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112

APC Smart-UPS VT, 32 kW / 40 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.

Includes: Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start up included, User Manual.

- Parallel-capacity capable
Increases total power capacity by using multiple UPSs simultaneously.
- Parallel-redundant capable
Power the connected equipment with multiple UPSs to increase system redundancy

Availability
- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtime
Allows additional run time to be quickly added as needed.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Battery modules connected in parallel
Delivers higher availability through redundant batteries.

Serviceability
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Battery replacement without tools
Allows quick, easy battery replacement.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
- Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Manageability
- Network manageable
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
- LCD display
Alpha-Numeric Display which displays system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.
- Programmable frequency
Ensures compatibility with different input frequencies.
- LED status indicators
Quickly understand unit and power status with visual indicators.
- SmartSlot
Customize UPS capabilities with management cards.

Total Cost of Ownership
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protection
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Cold-start capable
Provides temporary battery power when the utility power is out.
Dimensions
Width0
Height0
Length0
Depth (mm)813.0
Height (mm)823.0
Width (mm)523.0
Weight (Kg)182.5
General
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Basic Specification
Marketing TextEnsures clean, uninterrupted power to protected equipment when generator power is used. Delivers higher availability through redundant batteries
PI DATE
PI DateAug 2012
PRODUCT
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com/
Product TypeUninterruptible Power Supply
Product LineSmart-UPS VT
OTHER FEATURES
Operating Temperature0 - 40
Other Features* Nominal Output Voltage : 230V,400V 3PH
* Scalable runtime
* Automatic internal bypass
* Automatic self-test
* Modular design
* Intelligent battery management
ColourBlack
Control Panel* Multi-function LCD status and control console
Audible Alarm* Audible and visible alarms prioritized by severity
Input connection type5-wire (3PH + N + G)
Dimensions (WxDxH)523 x 813 x 823 mm
Output connections1 x Hard Wire 4-wire (3PH + G)
1 x Hard Wire 5-wire (3PH + N + G)
1 x Screw Terminals
InterfaceDB-9 RS-232,Smart-Slot
Package dimensions (WxDxH)720 x 1110 x 1290 mm
BATTERY
Battery recharge time5 h
POWER
Input Voltage400
Output Power32000 W
Output Voltage230
Input Frequency47 - 70
Output Frequency47 - 53
WaveformSinewave
Maximum current55 A
Output power capacity40000 VA
Emergency Power Off (EPO)Y
CONNECTION
Input Connection1 x Hard Wire 5-wire
SmartSlotYes
Weight & dimensions
Weight182.5 kg
Package weight221.5 kg
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-50 - 40 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 999.9 m
Non-operating altitude0 - 15000 m
Design
Product colourBlack
Certificates
CertificationC-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112
Performance
Noise level55 dB
Audible alarm(s)Y
Logistics data
Quantity per pallet1 pc(s)

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered!

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SUVTP40KHS
  • Availability: Out Of Stock
  • $17,254.51
  • Ex Tax: $15,685.92

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check