APC Smart-UPS VT 30kVA 400V uninterruptible power supply (UPS) 30000 VA
APC SUVTP30KH4B4SSMART-UPS VT 30KVA 400V W/4 BATT. MOD. START-UP 5X8 INTERNAL MAINT BYPASS PARALLEL CAPABILITY
Smart-UPS VT 30kVA 400V w/4 Batt. Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability
APC Smart-UPS VT 30kVA 400V, 30000 VA, 24000 W, 40/70 Hz, 41 A, VRLA, 5 h
APC Smart-UPS VT 30kVA 400V. Output power capacity: 30000 VA, Output power: 24000 W, Power supply input frequency: 40/70 Hz. Battery type: VRLA, Battery recharge time: 5 h. Product colour: Black. Noise level: 55 dB. Certification: C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112APC Smart-UPS VT, 24 kW / 30 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.
Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start up included, User Manual.
- Parallel-capacity capable
Increases total power capacity by using multiple UPSs simultaneously.
- Parallel-redundant capable
Power the connected equipment with multiple UPSs to increase system redundancy
- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtime
Allows additional run time to be quickly added as needed.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Battery modules connected in parallel
Delivers higher availability through redundant batteries.
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Battery replacement without tools
Allows quick, easy battery replacement.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
- Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
- Network manageable
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
- LCD display
Alpha-Numeric Display which displays system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.
- Programmable frequency
Ensures compatibility with different input frequencies.
- LED status indicators
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Total Cost of Ownership
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Cold-start capable
Provides temporary battery power when the utility power is out.
|Warranty Information||1 Year|
|Product Family||SCHNEIDER Power & Rack Equipment Power Eq|
|Marketing Text||Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy.Increases total power capacity by using multiple uninterruptible power supplies simultaneously.Increases availability by allowing the UPS to be connected to two separate power sources.|
|PI Date||Feb 2011|
|Manufacturer Web Site||http://www.apc.com/|
|Product Type||Uninterruptible Power Supply|
|Operating Temperature||0 - 40|
|Other Features||* Scalable runtime |
* Hot-swappable batteries
* Alpha-Numeric Display which displays system parameters and alarms.
* Automatic self-test
* Modular design
|Control Panel||* Multi-function LCD status and control console|
|Audible Alarm||* Audible and visible alarms prioritized by severity|
|Input connection type||Hard Wire 5-wire (3PH + N + G)|
|Nominal input voltage||400 V|
|Dimensions (WxDxH)||559 x 813 x 1499 mm|
|Output connections||1 x Hard Wire 4-wire (3PH + G) |
1 x Hard Wire 5-wire (3PH + N + G)
1 x Screw Terminals
|Package dimensions (WxDxH)||650 x 1062 x 1643 mm|
|Battery recharge time||5 h|
|Replacement battery cartridge||4|
|Output Power||24000 W|
|Input Frequency||40 - 70|
|Output Frequency||47 - 53|
|Maximum current||41 A|
|Output power capacity||30000 VA|
|Power supply input frequency||40/70 Hz|
|Emergency Power Off (EPO)||Y|
|Input Connection||1 x Hard Wire 5-wire|
|Weight & dimensions|
|Package weight||660 kg|
|Operating temperature (T-T)||0 - 40 °C|
|Operating relative humidity (H-H)||0 - 95%|
|Storage temperature (T-T)||-15 - 45 °C|
|Storage relative humidity (H-H)||0 - 95%|
|Operating altitude||0 - 999.9 m|
|Non-operating altitude||0 - 15000 m|
|Certification||C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112|
|Noise level||55 dB|