APC Smart-UPS VT 15kVA 400V w/2 uninterruptible power supply (UPS) 15000 VA



Smart-UPS VT 15kVA 400V w/2 Batt Mod., Start-Up 5X8, Int Maint Bypass, Parallel Capable

APC Smart-UPS VT 15kVA 400V w/2, 15000 VA, 12000 W, 40/70 Hz, 21 A, Sealed Lead Acid (VRLA), VRLA

APC Smart-UPS VT 15kVA 400V w/2. Output power capacity: 15000 VA, Output power: 12000 W, Power supply input frequency: 40/70 Hz. Battery technology: Sealed Lead Acid (VRLA), Battery type: VRLA, Battery recharge time: 5 h. Product colour: Black. Noise level: 64 dB. Certification: C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2, IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112

APC Smart-UPS VT, 12 kW / 15 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.

Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User Manual.

- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtime
Allows additional run time to be quickly added as needed.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Battery modules connected in parallel
Delivers higher availability through redundant batteries.

- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Battery replacement without tools
Allows quick, easy battery replacement.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
- Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

- Network manageable
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
- LCD display
Alpha-Numeric Display which displays system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.
- Programmable frequency
Ensures compatibility with different input frequencies.
- LED status indicators
Quickly understand unit and power status with visual indicators.
- SmartSlot
Customize UPS capabilities with management cards.

Total Cost of Ownership
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Cold-start capable
Provides temporary battery power when the utility power is out.
Input connection typeHard Wire 5-wire (3PH + N + G)
Nominal input voltage400 V
Dimensions (WxDxH)356 x 812 x 1499 mm
Output connections(1) Hard Wire 4-wire (3PH + G)
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals
InterfaceDB-9 RS-232, Smart-Slot
Package dimensions (WxDxH)650 x 1062 x 1643 mm
Battery technologySealed Lead Acid (VRLA)
Battery typeVRLA
Battery recharge time5 h
Replacement battery cartridge2
Output Power12000 W
Maximum current21 A
Output power capacity15000 VA
Power supply input frequency40/70 Hz
Emergency Power Off (EPO)Y
Weight & dimensions
Weight396.8 kg
Package weight428.2 kg
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 45 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 999.9 m
Non-operating altitude0 - 15000 m
Product colourBlack
CertificationC-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2, IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112
Noise level64 dB

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered!

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.


Different rates may apply for items >25kg or where special delivery requirements are requested


We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SUVTP15KH2B2S
  • Availability: Out Of Stock
  • $14,926.03
  • Ex Tax: $13,569.12

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check