APC SRTL1500RMXLI-NC uninterruptible power supply (UPS) 1500 VA 8 AC outlet(s) Double-conversion (Online)


APC Smart-UPS SRT Li-Ion 1500VA RM 230V Network Card

1.35 KW, 1.5 kVA, 230 V, 50/60 Hz, 8x IEC 320 C13, IEC-320 C14, Li-ion, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, 3U, IP20, 432x590x128 mm

APC SRTL1500RMXLI-NC, 1500 VA, 1350 W, 220 V, 240 V, 220 V, 240 V

APC SRTL1500RMXLI-NC. Output power capacity: 1500 VA, Output power: 1350 W, Input operation voltage (min): 220 V. AC outlet types: C13 coupler, AC outlets quantity: 8 AC outlet(s), Serial interface type: RJ-45. Battery technology: Lithium-Ion (Li-Ion), Battery recharge time: 6 h, Battery life (max): 10 year(s). Form factor: Rackmount, Product colour: Black,Grey, Rack capacity: 3U. UPS topology: Double-conversion (Online), Waveform: Sine, Noise level: 50 dB


Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Scalable runtime
Allows additional run time to be quickly added as needed.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.


Serial connectivity
Provides management of the UPS via a serial port.

LED status indicators
Quickly understand unit and power status with visual indicators.

Network manageable
Provides remote power management of the UPS over the network.

Customize UPS capabilities with management cards.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.


Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.


User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Marketing Features
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote accessibility.

Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Hot-swap batteryY
Automatic battery testY
Cold startY
Battery technologyLithium-Ion (Li-Ion)
Battery recharge time6 h
Battery life (max)10 year(s)
Output Power1350 W
Surge Energy Rating340 J
Output power capacity1500 VA
Input operation voltage (min)220 V
Input operation voltage (max)240 V
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Power supply input frequency40/70 Hz
Crest factor3:1
Emergency Power Off (EPO)Y
Weight & dimensions
Weight25.7 kg
Width432 mm
Depth590 mm
Height128 mm
Package weight37.4 kg
Package width600 mm
Package depth850 mm
Package height445 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-20 - 50 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 3000 m
Non-operating altitude0 - 15000 m
Form factorRackmount
International Protection (IP) codeIP20
Rack capacity3U
Product colourBlack,Grey
Ports & interfaces
AC outlets quantity8 AC outlet(s)
AC outlet typesC13 coupler
USB portY
Serial interfaceY
Serial interface typeRJ-45
Serial ports quantity1
Ethernet LAN (RJ-45) ports1
Cabling technology10/100Base-T
CertificationCE, EAC, RCM, VDE
UPS topologyDouble-conversion (Online)
Noise level50 dB
LED indicatorsStatus
Surge protectionY
Audible alarm(s)Y
Technical details
Input connectionsIEC-320 C14
Output frequency50/60 Hz
Output voltage230 V
Output connectionsIEC-320 C13
Logistics data
Quantity per pallet6 pc(s)

Write a review

Please login or register to review

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.


Different rates may apply for items >25kg or where special delivery requirements are requested


We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SRTL1500RMXLI-NC
  • Availability: In Stock
  • $4,927.82
  • Ex Tax: $4,479.84

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check