APC Smart-UPS uninterruptible power supply (UPS) 2200 VA 9 AC outlet(s) Line-Interactive

APC SMX2200RMHV2U

APC Smart-UPS X 2200VA Rack/Tower LCD 200-240V

Smart-UPS X 2200VA Rack/Tower LCD 200-240V

APC Smart-UPS, 2200 VA, 1980 W, 208 V, 240 V, 50/60 Hz, 645 J

APC Smart-UPS. Output power capacity: 2200 VA, Output power: 1980 W, Output operation voltage (min): 208 V. AC outlet types: C13 coupler,C19 coupler, Cable length: 1.83 m, AC outlets quantity: 9 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 3 h, Typical backup time at half load: 25.3 min. Form factor: Rackmount/Tower, Product colour: Black, Rack capacity: 2U. UPS topology: Line-Interactive, Hold time (min): 2 ms, Hold time (max): 10 ms

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Network manageable
Provides remote management of the UPS over the network.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial Connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification
Warns when a battery is not available to provide backup power.
ThumbFile information
External Battery Pack Installation.pdf 213.85KB 0
Installation Guide Smart-UPS.pdf 215.56KB 0
mmo_9491693_1474541378_2221_30389.pdf 207.35KB 0
mmo_9491693_1474541388_0973_5730.pdf 738.94KB 0
Product Environmental Profile.pdf 393.9KB 0
Dimensions
Width59
Height24
Length86
Depth (mm)667.0
Height (mm)85.0
Width (mm)432.0
Weight (Kg)37.3
General
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Basic Specification
Marketing TextProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications,
PI DATE
PI DateJuly 2011
PRODUCT
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com/
Product TypeUninterruptible Power Supply
Product LineSmart-UPS
OTHER FEATURES
Cord Length1.83
Operating Temperature0 - 40
Other Features* Input Frequency : 50/60 Hz +/- 3 Hz (auto sensing)
* Output Frequency (sync to mains) : 47-53 Hz for 50 Hz nominal, 57-63 Hz for 60 Hz nominal
* Boost and Trim Automatic Voltage Regulation (AVR)
* Intelligent battery management
* Power conditioning
* Automatic restart of loads after UPS shutdown
* Automatic self-test
* Disconnected battery notification
ColourBlack
Control PanelLED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
Audible AlarmAlarm when on battery : distinctive low battery alarm : configurable delays
Environmental ComplianceRoHS
Rack Height2
Nominal output voltage230 V
Nominal input voltage230 V
BATTERY
TypeSealed Lead Acid
Typical backup time at half load25.3 min
Typical backup time at full load9.8 min
Hot-swap batteryY
Automatic battery testY
Battery technologySealed Lead Acid (VRLA)
Battery capacity702 VAh
Battery replacement alarmsLED
Battery recharge time3 h
Replacement battery cartridgeSMX2200R2HVNC
Battery life (max)5 year(s)
POWER
Input Voltage230
Output Power1980 W
Output Voltage230
Surge Energy Rating645 J
Input Frequency50 - 60
WaveformSinewave
Output power capacity2200 VA
Output operation voltage (min)208 V
Output operation voltage (max)240 V
Power supply input frequency50/60 Hz
Efficiency98.1%
Emergency Power Off (EPO)Y
Output frequency regulation50/60 Hz
CONNECTION
Input Connection1 x IEC-320 C20
Output Connection8 x IEC 320 C13
SmartSlotYes
Interface1 x USB
Weight & dimensions
Weight37.3 kg
Width432 mm
Depth667 mm
Height85 mm
Package weight45.4 kg
Package width596 mm
Package depth869 mm
Package height243 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 45 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 3000 m
Non-operating altitude0 - 15000 m
Design
Form factorRackmount/Tower
Rack capacity2U
Product colourBlack
Ports & interfaces
AC outlets quantity9 AC outlet(s)
AC outlet typesC13 coupler,C19 coupler
USB portY
Cable length1.83 m
Number of output IEC jumpers2
SmartSlotY
Certificates
RoHS complianceY
CertificationCE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, FCC Part 15 Class A, IEC 60950, IRAM, RCM, UL 1778, VDE, REACH, PEP, EOLI
Performance
UPS topologyLine-Interactive
Noise level55 dB
LED indicatorsY
Surge protectionY
WaveformSine
Audible alarm(s)Y
Response time4 ms
Auto-restartY
Hold time (min)2 ms
Hold time (max)10 ms
Automatic Voltage Regulation (AVR)Y
Technical details
Input connectionsIEC-320 C20, Schuko CEE 7 / EU1-16P, BS1363A
Packaging content
ManualY
Cables includedRS-232,USB cable
Software CDY
Rack mount kitY
Logistics data
Quantity per pallet8 pc(s)

Write a review

Please login or register to review

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SMX2200RMHV2U
  • Availability: In Stock
  • $2,593.04
  • Ex Tax: $2,357.31

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check