APC SBPAR10K20H-WP power distribution unit (PDU) Black

APC SBPAR10K20H-WP

APC (SBPAR10K20H-WP) PARALLEL MAINTENANCE BYPASS PANEL, UP TO 3 UNITS 10-20KVA 400V

Parallel Maintenance Bypass Panel, up to 3 units 10-20kVA 400V Wallmount

APC SBPAR10K20H-WP, Black, EN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,VFI-SS-111, 1x Hard Wire 5-wire (3PH + N + G), 0 - 40 °C, -15 - 45 °C, 0 - 95%

APC SBPAR10K20H-WP. Product colour: Black, Certification: EN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,VFI-SS-111. Output connections: 1x Hard Wire 5-wire (3PH + N + G). Nominal input voltage: 400 V, AC input frequency: 50 Hz, Nominal output voltage: 400 V. Dimensions (WxDxH): 560 x 216 x 1174 mm, Weight: 48 kg, Package dimensions (WxDxH): 704 x 335 x 1298 mm

Availability
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.

Scalable runtime
Allows additional run time to be quickly added as needed.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.

Battery modules connected in parallel
Delivers higher availability through redundant batteries.

Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Battery replacement without tools
Allows quick, easy battery replacement.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.

Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
POWER
Nominal input voltage400 V
Nominal output voltage400 V
Maximum input current per phase182.4 A
AC input frequency50 Hz
Maximum total current draw per phase182.4 A
Weight & dimensions
Weight48 kg
Dimensions (WxDxH)560 x 216 x 1174 mm
Package weight22.7 kg
Package dimensions (WxDxH)704 x 335 x 1298 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 45 °C
Storage relative humidity (H-H)0 - 95%
Design
CertificationEN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,VFI-SS-111
Product colourBlack
Ports & interfaces
Output connections1x Hard Wire 5-wire (3PH + N + G)

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered!

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SBPAR10K20H-WP
  • Availability: Out Of Stock
  • $3,473.91
  • Ex Tax: $3,158.10

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check