APC MGE Galaxy 3500 10kVA 400V with 1 Battery Module uninterruptible power supply (UPS) 10000 VA

APC G35T10KH1B2S

MGE Galaxy 3500 10kVA 400V with 1 Battery Module Expandable to 2 Start-up 5X8

MGE Galaxy 3500 10kVA 400V with 1 Battery Module Expandable to 2, Start-up 5X8

APC MGE Galaxy 3500 10kVA 400V with 1 Battery Module, 10000 VA, 8000 W, 40/70 Hz, 14 A, Sealed Lead Acid (VRLA), VRLA

APC MGE Galaxy 3500 10kVA 400V with 1 Battery Module. Output power capacity: 10000 VA, Output power: 8000 W, Power supply input frequency: 40/70 Hz. Battery technology: Sealed Lead Acid (VRLA), Battery type: VRLA, Battery recharge time: 5 h. Product colour: Black. Noise level: 43.3 dB. Certification: CE,EN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO...

APC MGE Galaxy 3500, 8000 Watts / 10 kVA,Input 400V 3PH / Output 400V 3PH, Extended runtime model.

Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Smart UPS signalling RS-232 cable, Start-Up Service, User Manual.

Availability
- Dual mains input: Increases availability by allowing the UPS to be connected to two separate
power sources
- Scalable runtime: Allows additional runtime to be quickly added as needed
- Hot-swappable batteries: Ensure clean, uninterrupted power to protected equipment while
batteries are being replaced
- Generator compatible: Ensure clean, uninterrupted power to protected equipment when generator power is used
- Automatic internal static bypass: Supplies utility power to the connected loads in the event of a
UPS overload condition or fault
- Battery modules connected in parallel: Delivers higher availability through redundant batteries

Serviceability
- Batteries that can be replaced by qualified personnel: Increases availability by allowing qualified
personnel to perform upgrades and replacement of the batteries reducing the Mean Time To
Repair (MTTR)
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced
- Shippable with modules installed: Enables pre-installation UPS staging and testing and faster
installation
- Modular design: Provides fast serviceability and reduced maintenance requirements via selfdiagnosing, field-replaceable modules

Manageability
- Network manageable: Provides remote management of the UPS over the network
- InfraStruXure Central Compatible: Enables centralized management via InfraStruXure Central
- LCD: Alphanumeric display which displays system parameters and alarms
- Audible alarms: Provides notification of changing utility power and UPS conditions
- Programmable frequency: Ensures compatibility with different input frequencies
- LED status indicators: Quickly understand unit and power status with visual indicators
- SmartSlot: Customize UPS capabilities with managements cards

Total Cost of Ownership
- Input power factor correction: Minimizes installation costs by enabling the use of smaller
generators and cabling
- Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature
- Manual maintenance bypass: Reduces installation costs by eliminating the need for an external
mechanical bypass
- Intelligent battery management: Maximizes battery performance, life, and reliability through
intelligent, precision charging

Protection
- Frequency and voltage regulation: Gives higher application availability by correcting poor
frequency and voltage conditions without using the battery
- Safety-agency approved: Ensures the product has been tested and approved to work safely with
the connected service provider equipment and within the specified environment. UL, FCC, CE,
C-Tick approvals
- Cold-start capable: Provides temporary battery power when the utility power is out
Dimensions
Width0
Height0
Length0
General
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
OTHER FEATURES
Input connection type5-wire (3PH + N + G)
Dimensions (WxDxH)352 x 858 x 1491 mm
Output connections1 x 4-wire (3PH + G)
1 x 5-wire (3PH + N + G)
1 x Screw Terminals
Package dimensions (WxDxH)650 x 1062 x 1643 mm
Output voltage note+/-1%, +/- 5%
BATTERY
Battery technologySealed Lead Acid (VRLA)
Battery typeVRLA
Battery recharge time5 h
Replacement battery cartridge1
POWER
Output Power8000 W
Maximum current14 A
Output power capacity10000 VA
Power supply input frequency40/70 Hz
Emergency Power Off (EPO)Y
Weight & dimensions
Weight214 kg
Package weight245 kg
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 45 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 999.9 m
Non-operating altitude0 - 15000 m
Design
Product colourBlack
Certificates
CertificationCE,EN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-111
Performance
Noise level43.3 dB
LED indicatorsY

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered!

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: G35T10KH1B2S
  • Availability: Out Of Stock
  • $13,455.87
  • Ex Tax: $12,232.61

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check