APC Back-UPS Pro uninterruptible power supply (UPS) 900 VA 8 AC outlet(s) Line-Interactive



Power-Saving Back-UPS Pro 900, 230V

APC Back-UPS Pro, 900 VA, 540 W, 156 V, 300 V, 50/60 Hz, 613 J

APC Back-UPS Pro. Output power capacity: 900 VA, Output power: 540 W, Input operation voltage (min): 156 V. AC outlet types: C13 coupler, AC outlets quantity: 8 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 8 h, Typical backup time at half load: 15.9 min. Product colour: Black, Display: LCD. UPS topology: Line-Interactive, Hold time (min): 8 ms, Hold time (max): 10 ms

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS conditions.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity
Provides management of the UPS via a serial port.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

Battery replacement without tools
Allows quick, easy battery replacement.

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
ThumbFile information
Product Environmental Profile.pdf 379.63KB 0
mmo_5086229_1474379703_63_15379.pdf 310.48KB 0
mmo_5086229_1474379711_118_30678.pdf 113.86KB 0
Depth (mm)382.0
Height (mm)250.0
Width (mm)100.0
Weight (Kg)10.7
Product FamilySCHNEIDER Power & Rack Equipment Power Eq
Basic Specification
Marketing TextPatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
PI DateMar 2011
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com
Product TypeUninterruptible Power Supply
Product LineBack-UPS
Product ModelNot defined
Cord Length1.83
Operating Temperature0 - 40
Other Features* Audible alarms
* Battery failure notification
* Power-saving outlets
* Adjustable voltage-transfer points
* Provides management of the UPS via a USB port
Control Panel* Multi-function LCD status and control console
Audible Alarm* Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Nominal output voltage230 V
Nominal input voltage230 V
TypeSealed Lead Acid
Typical backup time at half load15.9 min
Typical backup time at full load4.6 min
Hot-swap batteryY
Automatic battery testY
Cold startY
Battery technologySealed Lead Acid (VRLA)
Battery capacity157 VAh
Battery recharge time8 h
Replacement battery cartridgeAPCRBC123
Battery life (max)5 year(s)
Input Voltage230
Output Power540 W
Output Voltage230
Surge Energy Rating613 J
Input Frequency50 - 60
Output Frequency50 - 60
Maximum current8 A
Output power capacity900 VA
Input operation voltage (min)156 V
Input operation voltage (max)300 V
Power supply input frequency50/60 Hz
Crest factor3:1
Output frequency regulation50/60 Hz
Input Connection1 x IEC-320 C14
Output Connection8 x IEC 320 C13
Interface1 x USB
Weight & dimensions
Weight10.7 kg
Width100 mm
Depth382 mm
Height250 mm
Package weight11.7 kg
Package width225 mm
Package depth487 mm
Package height337 mm
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-15 - 45 °C
Storage relative humidity (H-H)0 - 95%
Operating altitude0 - 2952.6 m
Non-operating altitude0 - 4763.6 m
Product colourBlack
Ports & interfaces
AC outlets quantity8 AC outlet(s)
AC outlet typesC13 coupler
USB portY
Number of output IEC jumpers2
RoHS complianceY
CertificationREACH, PEP, EOLI, NEMKO-GS, GOST, CE, C-Tick, KETI, TISI, A-Tick
Audible alarm modesLow battery alarm,Overload alarm
UPS topologyLine-Interactive
Noise level45 dB
Surge protection featuresDigital Subscriber Line (DSL),Fax,Modem,Network,Telephone
Surge protectionY
Audible alarm(s)Y
Hold time (min)8 ms
Hold time (max)10 ms
Automatic Voltage Regulation (AVR)Y
Technical details
Input connectionsIEC-320 C14
Packaging content
Warranty cardY
Bundled softwarePowerChute Personal Edition
Cables includedUSB cable
Software CDY
Logistics data
Quantity per master carton1 pc(s)
Quantity per pallet30 pc(s)

Write a review

Please login or register to review

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.


Different rates may apply for items >25kg or where special delivery requirements are requested


We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: BR900GI
  • Availability: In Stock
  • $414.06
  • Ex Tax: $376.42

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check