APC AP8959 Rack PDU 2G Switched ZeroU 20A/208V 16A/230V (21) C13 & (3) C19


RACK PDU 2G, SWITCHED, ZEROU, 20A/208V, 16A/230V, (21) C13 & (3) C19

Manufactured by: APC - SCHNEIDER

Part Number: AP8959

Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (21) C13 & (3) C19

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable

Brand Name: APC
Form Factor: Rack-mountable
Input Receptacles: IEC 60320 C20
Output Receptacles: 21 x IEC 60320 C13
3 x IEC 60320 C19
Product Type: PDU
General Information
Brand Name: APC
Manufacturer Part Number: AP8959
Manufacturer Website Address: http://www.apc.com/au
Manufacturer: American Power Conversion Corp
Product Line: Switched Rack
Product Model: AP8959
Product Name: Switched Rack AP8959 24-Outlets PDU
Product Type: PDU


  • Web
  • SNMP
  • Telnet
  • Command Line Interface
Environmental Certification: REACH
Environmentally Friendly: Yes
Package Contents:
  • Switched Rack AP8959 24-Outlets PDU
  • Installation Guide
  • Rack Mounting Brackets
  • Safety Guide
  • Sample Locking IEC Power Cord
  • Serial Configuration Cable
Physical Characteristics
Depth: 46 mm
Form Factor: Rack-mountable
Height: 1791 mm
Weight (Approximate): 5.73 kg
Width: 56 mm
Power Description
Input Voltage: 200 V AC
230 V AC
Output Voltage: 200 V AC
230 V AC
Technical Information
Input Receptacles: IEC 60320 C20
Output Receptacles: 21 x IEC 60320 C13
3 x IEC 60320 C19
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Basic Specification
Marketing TextAPC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring.
PI DateJul 2011
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com
Product TypeRack PDU
Input Voltage230
Output Voltage230
Input Frequency50/60
Input Connections1 x IEC-320 C20
Input Current20
Maximum Total Current16
Voltage Range100 - 240
Depth (mm)46.0
Height (mm)1791.0
Width (mm)56.0
Weight (Kg)5.7
Operating Temperature-5 to 45

Write a review

Please login or register to review

Flat Rate Shipping

$15 DELIVERY FEE applies to all orders within Australia.


Different rates may apply for items >25kg or where special delivery requirements are requested


We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: AP8959
  • Availability: In Stock
  • $1,550.57
  • Ex Tax: $1,409.61

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check