APC AP8958EU3 Rack PDU 2G Switched ZeroU 16A 230V (7) C13 & (1) C19 IEC309 Cord

Out Of Stock

APC - SCHNEIDER AP8958EU3

RACK PDU 2G, SWITCHED, ZEROU, 16A, 230V, (7) C13 & (1) C19,IEC309 CORD

Manufactured by: APC - SCHNEIDER

Part Number: AP8958EU3

Rack PDU 2G, Switched, ZeroU, 16A, 230V, (7) C13 & (1) C19, IEC309 Cord

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Includes : Installation guide , Locking input power cord , Rack Mounting brackets , Safety guide , Serial configuration cable


Basic
Brand Name: APC
Form Factor: Rack-mountable
Output Receptacles: 1 x IEC 60320 C19
7 x IEC 60320 C13
Product Type: PDU
General Information
Brand Name: APC
Manufacturer Part Number: AP8958EU3
Manufacturer Website Address: http://www.apc.com/au
Manufacturer: American Power Conversion Corp
Product Line: Switched Rack
Product Model: AP8958EU3
Product Name: Switched Rack AP8958EU3 8-Outlets PDU
Product Type: PDU
Management
Management:

Protocols:

  • Web
  • SNMP
  • Telnet
  • Command Line Interface
Miscellaneous
Additional Information:

Input Receptacle: IEC 309 16A 2P+E

Environmental Certification: REACH
RoHS
Environmentally Friendly: Yes
Package Contents:
  • Switched Rack AP8958EU3 8-Outlets PDU
  • Installation Guide
  • Locking Input Power Cord
  • Rack Mounting Brackets
  • Safety Guide
  • Sample Locking IEC Power Cord
  • Serial Configuration Cable
Physical Characteristics
Depth: 46 mm
Form Factor: Rack-mountable
Height: 988 mm
Number of Cord/Cable: 1
Weight (Approximate): 3.23 kg
Width: 56 mm
Power Description
Input Voltage: 200 V AC
208 V AC
230 V AC
Output Voltage: 200 V AC
208 V AC
230 V AC
Warranty
Warranty Information2 years repair or replace
Dimensions
Width16
Height11
Length113
General
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po
Basic Specification
Marketing TextAPC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring.
PI DATE
PI DateJul 2011
PRODUCT
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com
Product TypeSwitched Rack PDU
Form Factor0U
DEVICE FEATURES
Input Voltage200
Output Voltage200
Input Frequency50/60
Input Connections1 x IEC 309 16A 2P+E
Output Connections7 x IEC 320 C13
Input Current16
Voltage Range220 - 240
DIMENSION
Depth (mm)46.0
Height (mm)988.0
Width (mm)56.0
Weight (Kg)3.2
OTHER FEATURES
ColorBlack
Cord Length3
Operating Temperature-5 to 45
Package Includes* Installation guide
* Locking input power cord
* Rack Mounting brackets
* Safety guide
* Sample locking IEC power cord
* Serial configuration cable
Compliance Standards* RoHS
Other Features* Network Management
* Remote Individual Outlet Control
* Local Current Monitoring Display
* Flash Upgradeable
* Nominal Output Voltage: 200V,208V,230V
* Nominal Input Voltage: 200V,208V,230V
* Maximum Line Current per phase: 16A
* Maximum Input Current per phase: 16A

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered. For more information, lead times or high quantity – please call us on 02 8209-3338 

Flat Rate Shipping

$15 DELIVERY FEE applies to all orders within Australia.

 

Different rates may apply for items >25kg or where special delivery requirements are requested

 

We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: AP8958EU3
  • Availability: Out Of Stock
  • $1,483.58
  • Ex Tax: $1,348.71

Additional Support

Please contact us if you require more informationon, such as:

Choosing suitable UPS system, UPS Battery Replacement, Installation, Preventative Maintanance, Backup Time Calculation, Network Communication and Remote Monitoring, Price and Stock check